Service chests

Prefabricated concrete inspection chambers for connecting, distributing, inspecting and maintaining buried ducts for sanitation, water supply, irrigation, electricity, telecommunications and other civil engineering services.

Service manholes as a system for water channeling

Showing 1-22 of 22 item(s)

ARQUETA DE 40 X 40

Precast concrete and cast caps

40 X 40 service chests with bottom

The concrete manhole has a high capacity against different pressures to allow greater control of the flow of multiple pipes in the home or community.

ARQUETA DE 40 X 40

Precast concrete and cast caps

40 X 40 service chests without bottom

Manholes are small bottomless tanks that are used for urban equipment, civil works and public spaces. They have a top cover to register them.

ARQUETA DE 50 X 50

Precast concrete and cast caps

50 X 50 service chests with bottom

Service manholes are small tanks that are used to link, distribute and receive underground pipelines. They usually remain buried. They have a cover on the top to register them

ARQUETA DE 50 X 50

Precast concrete and cast caps

50 X 50 service chests without bottom

50 x 50 cement manholes are designed to be used in manholes. This bottomless manhole favors the passage of water and ventilation of the well.

ARQUETA DE 60 X 60 CON FONDO

Precast concrete and cast caps

60 X 60 service chests with bottom

Telecommunications manholes allow the placement of cables. They are 60x60 manholes with a bottom and have good dimensions to be comfortable and facilitate their use in certain well services.

ARQUETA DE 60 X 60 SIN FONDO

Precast concrete and cast caps

60 X 60 service chests without bottom

The 60x60 service chest is made of highly resistant concrete. Bottomless manholes are suitable for use in well services and as an irrigation manhole.

ARQUETA DE 70 X 70 CON FONDO

Precast concrete and cast caps

70 X 70 service chests with bottom

The 70x70 manhole with bottom can be used in manholes and as a ventilation system. This concrete service manhole allows water to pass through.

ARQUETA DE 70 X 70 SIN FONDO

Precast concrete and cast caps

70 X 70 service chests without bottom

The bottomless service manhole is very useful in manholes and ventilation. Likewise, this 70x70 manhole serves as a well irrigation manhole.

ARQUETA DE 96 X 96 CON FONDO

Precast concrete and cast caps

Service chests 96 X 96 ext. with depth 80 X 80 int.

The manholes with a bottom are made of concrete and are intended to be used in manholes and similar. It has three windows to allow water to pass through.

ARQUETA DE 96 X 96 SIN FONDO

Precast concrete and cast caps

Service chests 96 X 96 ext. without bottom 80 X 80 int.

The 80x80 service manholes can be used in the ventilation of manholes. As well as to replace bottomed manholes with a multipurpose concrete manhole.

ARQUETA DE 120 X 120 CON FONDO

Precast concrete and cast caps

Service chests 120 X 120 ext. with depth 100 X 100 int.

The 100x100 manhole with bottom is an alternative for ventilation of manholes. This concrete manhole box is quite resistant and has 3 windows.

ARQUETA DE 96 X 96 SIN FONDO

Precast concrete and cast caps

Service chests 120 X 120 ext. without bottom 100 X 100 int.

The 100x100 bottomless chest is multipurpose and is made of durable and long-lasting material. A registration and service chest favors ventilation thanks to its windows.

ARQUETA DE 96 X 96 SIN FONDO

Precast concrete and cast caps

Service chests 96 X 96 ext. without bottom 80 X 80 X 40 int supl.

Use these service manholes designed to ventilate service wells. They can also be used to replace other manholes with multi-purpose concrete bottoms of similar sizes.

ARQUETA DE 100 X 100 X 50 SIN FONDO SUPL

Precast concrete and cast caps

Service chests 120 X 120 ext. without bottom 100

Use these multipurpose service chests made of very resistant and durable materials. You can easily use these accessories and adapt them with other chests with a bottom of similar or smaller measurements.

ARQUETA DE 140 X 140 CON FONDO

Precast concrete and cast caps

Service chests 140 X 140 ext. with depth 120 X 120 X 107 int.

These service chests with a bottom are suitable for medium distances. This accessory will give you the ability to carry out work on manhole bottoms and replace irrigation manholes.

ARQUETA DE 140 X 140 SIN FONDO

Precast concrete and cast caps

Service chests 140 X 140 ext. without bottom 120 X 120 X 107 int

You can use these service manholes with a concrete bottom for manholes and irrigation manholes. The measurements of this accessory make it very easy to use and adapt.

ARQUETA DE 120 X 120 X 53 SIN FONDO SUPL

Precast concrete and cast caps

Service chests 140 X 140 ext. without bottom 120

Service manholes with bottom, specially designed for very heavy industrial work. They are made with concrete, can be adapted into manholes and function as irrigation manholes.

ARQUETA DE 160 X 160 CON FONDO

Precast concrete and cast caps

Service chests 160 X 160 ext. with depth 140 X 140 X 119 int.

Service chests with bottom for all types of industrial work. This accessory can be used for work in manholes, in addition to functioning correctly as irrigation manholes and more.

ARQUETA DE 160 X 160 SIN FONDO

Precast concrete and cast caps

Service chests 160 X 160 ext. without bottom 140 X 140 X 119 int.

Industrial service manholes are structures made of concrete with specific measurements and great resistance. Bottomless models are used as irrigation manholes and in manholes.

ARQUETA DE 140 X 140 X 60 SIN FONDO SUPL

Precast concrete and cast caps

Service chests 160 X 160 ext. without bottom 140

These industrial service manholes are made of concrete with specific measurements and are very resistant. Bottomless manholes are used as irrigation manholes and in well services.

ARQUETA DE 60 X 60 X 30 SIN FONDO SUPL

Precast concrete and cast caps

Service chests 60 X 60 ext. without bottom 50

Industrial service manholes are small concrete structures with specific measurements and very resistant. Bottomless manholes are used as irrigation manholes and in well services.

ARQUETA DE 70 X 70 X 30 SIN FONDO SUPL

Precast concrete and cast caps

Service chests 70 X 70 ext. without bottom 60

Manholes are structures made of resistant concrete and in various sizes. The bottomless manhole models are used for well service and as an irrigation manhole.

Concrete inspection chambers for buried ducts

Service inspection chambers are prefabricated structures installed underground to house connections, branches and access points to pipes and ducts.

Their upper opening allows a removable cover or access cover to be fitted for inspections, cleaning, repairs and other maintenance tasks without having to fully uncover the installation.

They are used in domestic, residential, agricultural, industrial and urban networks, adapting to different services through the available sizes, openings and configurations.

Functions of a service inspection chamber

Inspection chambers allow an underground network to be organised and accessible points to be created in the areas where ducts meet or change direction.

Connection: they join different pipe or duct sections.
Branching: they allow the service to be distributed to different branches.
Change of direction: they facilitate the adaptation of the network route.
Access cover: they provide access to inspect the condition of the installation.
Maintenance: they allow cleaning, repairs and replacements to be carried out.
Protection: they keep connections and accessories housed inside a resistant structure.

Prefabricated concrete inspection chambers

These inspection chambers are made of mass concrete, a material commonly used in buried installations due to its rigidity and resistance to ground conditions.

According to the technical information of the range, the concrete has a minimum strength of 40 N/mm². This value must be assessed together with the dimensions, the design of the inspection chamber, the type of backfill and the actual installation conditions.

As prefabricated elements, they facilitate planning and execution of the work by being supplied with predefined sizes and configurations.

Common applications

Sanitation and water drainage networks.
Water supply and distribution systems.
Agricultural irrigation and gardening installations.
Buried electrical ducts.
Telecommunications networks.
Urban developments, homes and communities.
Industrial installations.
Public works and civil engineering projects.

Inspection chambers with different connection openings

The openings are side holes intended for the passage of pipes, conduits or ducts. The required number and position will depend on the number of inlets, outlets and branches planned in the project.

Before selecting an inspection chamber, it is advisable to check the outer diameter of the ducts, their orientation and the height at which they must pass through the walls.

Openings that are not going to be used must be treated according to the planned construction system, maintaining the integrity and watertightness required for the installation.

Inspection chambers with bottom and without bottom

Within the range, models with different configurations can be found, including inspection chambers with bottom or without bottom, depending on the needs of the project.

Inspection chambers with bottom

They include an integrated base that completely delimits the inside of the inspection chamber and facilitates the creation of a closed enclosure for connections and access covers.

Inspection chambers without bottom

They are placed on a base prepared on site and can be used in installations where the project includes an independent slab or another support solution.

How to choose a concrete inspection chamber

The selection must be made according to the ducts, the internal space required and the installation conditions.

Internal dimensions: they must allow the connections to be housed and work to be carried out during maintenance.
External dimensions: check the space available for excavation and backfilling.
Number of openings: it must match the required inlets, outlets and branches.
With bottom or without bottom: select the option planned in the project.
Depth: assess the duct level and the final height of the access cover.
Cover and frame: confirm that the dimensions are compatible with the upper opening.
Installation area: check the loads and conditions expected on the cover.

Installation and access for maintenance

The inspection chamber must be placed on a properly prepared and levelled base, following the project specifications and taking into account the ground, ducts and expected loads.

Connections must remain organised and accessible to allow future inspections. The upper cover must fit the opening and be suitable for the area where it will be installed.

In pedestrian areas, car parks or areas with traffic, a cover or access cover with the load class corresponding to the intended use must be selected.

Need to choose a service inspection chamber?

Tell us the dimensions, the number of ducts, the diameters and whether you need an inspection chamber with bottom or without bottom. We will help you find the most suitable configuration.

Product added to wishlist

Product added to compare.