Terminals and connectors

The terminals and connectors are similar but have different uses. Industrial type connectors are used to make connections between cables and some element of the circuit. On the other hand, terminals for industrial use join cables with electrical equipment. Electrical circuits are made up of a large multitude of components, including cables and wires; Electrical connectors are used to join them together to form a continuous path for electrical current to flow, dramatically reducing the effort, time and labor needed to manufacture, install and assemble electrical devices, wiring and their components. Terminals and connectors are different as the terminal is used to connect and disconnect cables with ease. We have a wide variety available, and the function varies depending on the shape: fork, pointed, or round.

The terminals and connectors are characterized by connecting the cables

Showing 1-39 of 39 item(s)

Special article fork shape

Special article fork shape 2

Terminals and connectors

Special article fork shape

Special fork-shaped item, specially designed for industrial work. This accessory will make it easier for you to repair cables of different thicknesses or gauges for electrical installations.

Insulated annular tubular terminal w/nylon

Insulated annular tubular terminal w/nylon 2

Terminals and connectors

Insulated annular tubular terminal w/nylon

Nylon-coated annular tubular terminal that allows the cable to be isolated. This accessory can be used on cables of different thicknesses and prevents possible short circuits from forming.

Tubular terminal DIN 46234

Tubular terminal DIN 46234 2

Terminals and connectors

Tubular terminal DIN 46234

DIN 46234 type tubular terminal for use in any industrial cable. The accessory works perfectly with electrical cables of different diameters or thicknesses designed to operate heavy machinery.

Tubular fork terminal DIN 46234

Tubular fork terminal DIN 46234 2

Terminals and connectors

Tubular fork terminal DIN 46234

The Tubular Fork Terminal is the end of a guide that comes into contact with another electrical element, therefore providing a connection point between the circuits.

tubular toe terminal

tubular toe terminal 2

Terminals and connectors

tubular toe terminal

The tubular ferrule terminal is a piece specially designed for crimping cables, allowing for a guaranteed and good connection. They are made of high-conductivity copper.

Parallel Splicers

Parallel Splicers 2

Terminals and connectors

Parallel Splicers

Parallel splicers are pieces that are used when the cables are not going to be tied to high tension forces. The splicers provide high performance at an industrial level.

DIN 46341-form B connector splice

DIN 46341-form B connector splice 2

Terminals and connectors

DIN 46341-form B connector splice

The DIN connector splice is a piece used to intertwine electrical cables efficiently. The splice has a B shape. The splice is easy to use.

Cu tubular terminal. (T series) 1.5mm-185mm

Cu tubular terminal. (T series) 1.5mm-185mm 2

Terminals and connectors

Cu tubular terminal. (T series) 1.5mm-185mm

185 mm tubular terminal manufactured to carry out repair work on industrial cables. The accessory is specially designed to fit cables of different thicknesses without any problem.

Cu tubular terminal. (T series) 240mm-630mm

Cu tubular terminal. (T series) 240mm-630mm 2

Terminals and connectors

Cu tubular terminal. (T series) 240mm-630mm

Tubular terminal, manufactured to carry out repairs in the industrial sector. It can work with diameters from 240 to 630 mm and work correctly with machinery that requires high voltages.

Connector splice (M)

Connector splice (M) 2

Terminals and connectors

Connector splice (M)

The M model connector splice is a piece that is used to join two or more cables to carry out an electrical installation, within an electronic equipment or device.

Tubular TerminalsNormal execution

Tubular TerminalsNormal execution 2

Terminals and connectors

Tubular TerminalsNormal execution

Normal execution tubular terminals manufactured especially for industrial work. This accessory can be used to work on cables that have different thicknesses or gauges used in the industrial sector.

F-Type Tubular Terminals

F-Type Tubular Terminals 2

Terminals and connectors

F-Type Tubular Terminals

Type F tubular terminals for special applications of stranded cables. This is an industrial accessory that you can use to connect cables of different gauges for narrow flange devices.

Splice (connector) DIN -40500

Splice (connector) DIN -40500 2

Terminals and connectors

Splice (connector) DIN -40500

DIN type splicing connector to make interconnections in cables in the industrial sector. The accessory will be useful for carrying out repairs in electrical installations with cables of different thicknesses.

Pre-insulated Nylon Terminal

Pre-insulated Nylon Terminal 2

Terminals and connectors

Pre-insulated Nylon Terminal

Pre-insulated nylon terminal useful for all types of repairs in the industrial sector. This tool can work on cables of different thicknesses that are attached to high voltage machinery.

Tubular Terminal 0.75-95 mm²

Tubular Terminal 0.75-95 mm² 2

Terminals and connectors

Tubular Terminal 0.75-95 mm²

Use this 95 mm tubular terminal to make repairs on industrial electrical cables. This accessory will be useful for repairing or joining cables for machinery or high-voltage installations.

Tubular Terminal 6-25 mm²

Tubular Terminal 6-25 mm² 2

Terminals and connectors

Tubular Terminal 6-25 mm²

Acquire this 25 mm tubular terminal for industrial work. This accessory can be deformed with the help of some tools to adapt perfectly to electrical cables of different gauges.

Tubular Terminal 35-240 mm²

Tubular Terminal 35-240 mm² 2

Terminals and connectors

Tubular Terminal 35-240 mm²

Purchase this 240 mm tubular terminal to make connections between cables used in the industrial sector. The accessory will be useful for repairing electrical wiring of different machines and installations.

Connector splice 0.75 -400 mm²

Connector splice 0.75 -400 mm² 2

Terminals and connectors

Connector splice 0.75 -400 mm²

Purchase this splice with a 400 mm connector for electrical system repairs. The accessory can work with cables of generic diameters and that support high voltage loads.

T-connector splice

T-connector splice 2

Terminals and connectors

T-connector splice

This T-connector splice will serve you for repairs in electrical installations. The accessory will give you the ability to make connections between different devices to supply them with power.

DIN Tubular Terminal

DIN Tubular Terminal 2

Terminals and connectors

DIN Tubular Terminal

You can use this tubular terminal to carry out work on installations or electricity cables. The DIN type accessory will be very helpful to make different resistant and durable connections.

Tubular Terminals

Tubular Terminals 2

Terminals and connectors

Tubular Terminals

Acquire these tubular terminals designed for industrial work or repair. The accessory can be used to repair and join cables of different thicknesses of machinery or high-voltage electrical installations.

Terminal DIN 46235

Terminal DIN 46235 2

Terminals and connectors

Terminal DIN 46235

Special DIN 46235 terminal for you to make industrial electrical wiring connections. The accessory can be used to adapt it to cables with one or more wires of different thicknesses or gauges.

Splicers for DIN compressed round conductors

Splicers for DIN compressed round conductors 2

Terminals and connectors

Splicers for DIN compressed round conductors

Get these splicers for compressed round conductors, especially for electrical repairs. The device will allow you to join and repair industrial electrical cables of different gauges or thicknesses.

DIN 40085 connector splice

DIN 40085 connector splice 2

Terminals and connectors

DIN 40085 connector splice

Purchase this splice with connector for industrial wiring repairs. You can use this DIN 40085 type accessory to work with cables of different thicknesses from machinery or high voltage installations.

Splicers for crimping 6-1000 mm²

Splicers for crimping 6-1000 mm² 2

Terminals and connectors

Splicers for crimping 6-1000 mm²

1000 mm splicers so you can carry out repairs in industrial electrical installations. The accessory can be crimped to make very resistant cable joints of different gauges or thicknesses

Crimping splicers

Crimping splicers 2

Terminals and connectors

Crimping splicers

Crimping splicers designed for all industrial work on electrical cables. This accessory can be crimped with professional tools to make very strong and durable joints between different cables.

Angled terminal 90o DIN 46235

Angled terminal 90o DIN 46235 2

Terminals and connectors

Angled terminal 90o DIN 46235

This angled terminal will help you carry out work in electrical installations in the industrial sector. The DIN type accessory will be useful for connecting cables of generic diameters of high power cables.

Terminals, ring shape, 100% nickel

Terminals, ring shape, 100% nickel 2

Terminals and connectors

Terminals, ring shape, 100% nickel

Purchase these ring-shaped terminals made entirely of nickel. The accessory will be very useful for repairs or connections of electrical wiring of machinery or industrial facilities.

Terminals, fork shape, 100% nickel

Terminals, fork shape, 100% nickel 2

Terminals and connectors

Terminals, fork shape, 100% nickel

Acquire these fork-shaped terminals for connections between industrial electrical wiring. This accessory is made of nickel, a very resistant material that facilitates the passage of current.

100% nickel splicers

100% nickel splicers 2

Terminals and connectors

100% nickel splicers

Purchase these splicers made of nickel for all types of industrial work with electricity. This accessory can be adapted to cables of different thicknesses to make strong and resistant joints.

Terminales de conexión tubulares estándar aluminio

Terminales de conexión tubulares estándar aluminio 2

Terminals and connectors

Standard aluminum tubular connection terminals

Tubular connection terminals made with aluminum for industrial work. This accessory will help you make repairs and connections on the high voltage cables of any heavy machinery.

Standard aluminum splicers

Standard aluminum splicers 2

Terminals and connectors

Standard aluminum splicers

Purchase these standard aluminum splicers to join electrical cables. This accessory will be used for wiring electrical installations or high-power industrial machinery.

Terminal Al. -DIN 46329

Terminal Al. -DIN 46329 2

Terminals and connectors

Terminal Al. -DIN 46329

Use this DIN terminal to work with elements that work with electricity. The accessory is designed to repair cables of different calibers of machinery or installations in the industrial sector.

Terminal Al. DIN 48201

Terminal Al. DIN 48201 2

Terminals and connectors

Terminal Al. DIN 48201

This DIN terminal can be used to carry out any industrial electrical work. The accessory is designed to work on cables of different diameters or thicknesses to make strong and resistant joints.

Terminals to Press al and cu

Terminals to Press al and cu 2

Terminals and connectors

Terminals to Press al and cu

Use these terminals to carry out repairs on wiring in the industrial sector. The accessory is made of materials that can be molded with pressing machines without being easily damaged.

Connector splice Al. DIN 46267

Connector splice Al. DIN 46267 2

Terminals and connectors

Connector splice Al. DIN 46267

This splice with DIN connector will help you carry out repairs on electrical cables. The accessory can be adapted with the help of pliers without damaging it, to work on different calibers.

Splicer to press Al.

Splicer to press Al. 2

Terminals and connectors

Splicer to press Al.

Purchase this splicer to be able to connect cables of all gauges. This crimping accessory can help you make connections and repairs in electrical industrial facilities or machinery.

Cupal Washer

Terminals and connectors

Cupal Washer

Acquire this cupal washer specially designed for assembly structures or industrial machinery. These tools will help you secure nuts and screws so that industrial work is very safe.

Splicer to press Al.-Cu

Splicer to press Al.-Cu 2

Terminals and connectors

Splicer to press Al.-Cu

Purchase this Syscon crimping splicer designed for industrial work. This accessory will help you mold different reduction connectors made of copper or aluminum and make connections.

Product added to wishlist

Product added to compare.