Accessories BUS REG-050 2-wire voltage regenerator 9650013 €75.02 BUS voltage regenerator. It allows the bus voltage to be restored at points of the installation where, due to its characteristics, it is required to guarantee the correct functioning of the system. It is used in 2-wire system installations. Add to cart
Accessories ALS-020 feeder interface 9650004 €162.26 The power supply converts the mains voltage to the voltages necessary for the electronic video intercom system. DIN rail format 6 elements, for wall or rail mounting. This feeder is protected against short circuits. It is used in 2-wire system installations. Add to cart
Accessories APX-011 2-wire telephone function amplifier accessory 9730072 €30.13 Accessory for Door Entry Systems installations. Accessory to expand functions of the 2-wire system telephone: landing call reception, call repeater connection... Add to cart
Accessories SCM-051 2-wire monitor support with connection 9630031 €78.71 Element in which all the connections of the video intercom system in the home are made, allowing the video intercom monitor to be connected to the rest of the installation. Direct fixing to wall or mechanism box. Support for wall installation of the video intercom monitor in 2-wire video intercom systems. Add to cart
Accessories CAB-307 shielded cable with 2x1mm2 sheath 9750009 €2.36 Alcad supplies this cable specially designed for 2-wire system installations. Its frequency characteristics make it ideal for carrying out any installation, minimizing signal losses at the frequencies at which the video intercom works. Add to cart
Accessories Set of vertical dividers for embedding box CEM002 iBLACK plate (2u) 9740208 €18.94 Accessory that allows several plates to be coupled together perfectly aligned. It is used in iBLACK plates that are going to be installed on flush-mounted boxes. Vertical separation, plates aligned in the same column. Add to cart
Accessories CCV-001 adapter for street panel and CCTV camera 9730086 €74.60 Accessory for Door Entry Systems installations. Adapter to replace the street panel camera with an external CCTV camera. 2 wire system. Add to cart
Accessories DIV-152 diverter for 2-wire 4-output system 9730082 €86.39 Accessory for Door Entry Systems installations. Distributor for 2-wire system, 2 outputs. Allows installations where the 2-wire system signal needs to be distributed to different branches. Up to 2 independent exits or branches. Direct power supply through the bus, without additional wires. Add to cart
Accessories Telephone trim frame 250x275mm MAE-102 9730093 €127.17 Accessory for Door Entry Systems installations. Replacement frame for phone. Dimensions: 250x275 mm Add to cart
Accessories Telephone trim frame 125x275mm MAE-101 9730092 €127.17 Accessory for Door Entry Systems installations. Replacement frame for phone. Dimensions: 125x275 mm Add to cart
Accessories Vertical separator for flush-mounted boxes for iVANDAL plates 9740225 €11.68 Accessory that allows several plates to be coupled together perfectly aligned. It is used in iVANDAL boards. Vertical separation, plates aligned in the same column. Add to cart
Accessories Optimized shielded 2x1 mm² cable 500 9750010 €2.36 Alcad supplies this cable specially designed for 2-wire system installations. Its frequency characteristics make it ideal for carrying out any installation, minimizing signal losses at the frequencies at which the video intercom works. Add to cart
Accessories iPAL flush-mount box for PDK-20003 9740229 €14.16 To embed an outdoor panel into the wall, it is necessary to previously place a mounting box where we will later fix the panel. This box is made of aluminum. It has plates that allow the entrance panel to be held during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories iPAL flush-mount box for PDK-20001/2 9740228 €14.16 To embed an outdoor panel into the wall, it is necessary to previously place a mounting box where we will later fix the panel. This box is made of aluminum. It has plates that allow the entrance panel to be held during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories Electromagnetic closure 500kg 9730077 €256.34 Accessory for Door Entry Systems installations. Electromagnetic Closure 500 Kg. To Override 12 / 24 VDC Add to cart
Accessories Electromagnetic closure 300kg 9730076 €202.19 Accessory for Door Entry Systems installations. Electromagnetic Closure 300 Kg. To Override 12 / 24 VDC Add to cart
Accessories iACCESS control center 9690038 €389.44 iACCESS SYSTEMiACCESS is an access control system using proximity readers integrated into our door panels, which allow access to the facilities through the use of electronic keys, avoiding the use of traditional keys or memorize access codes. Add to cart
Accessories iPAL KABI7 monitor connector 9630080 €29.34 Accessory for Door Entry Systems installations. Alarm derivator in IP system. Wired alarm outputs for connection to the KABI monitor. NO or NC switches. Add to cart
Accessories Power supply 48V dc 65.3 VA 100-240VAC 9620023 €146.23 The power supply converts the mains voltage to the voltages necessary for the electronic video intercom system. DIN rail format 6 elements, for wall or rail mounting. This feeder is protected against short circuits. It is used in IPAL system installations. Add to cart
Accessories Replacement frame 3 iVANDAL plates 9740233 €537.12 Useful in replacements, when the entrance panel to be replaced is larger than the entrance panel to be installed or in installations where the wall has irregularities. Construction in AISI 316L stainless steel with a thickness of 2.5 mm. Protection against knocks and impacts up to IK09 grade. Add to cart
Accessories Replacement frame for 2 iVANDAL plates 9740232 €507.90 Useful in replacements, when the entrance panel to be replaced is larger than the entrance panel to be installed or in installations where the wall has irregularities. Construction in AISI 316L stainless steel with a thickness of 2.5 mm. Protection against knocks and impacts up to IK09 grade. Add to cart
Accessories Replacement frame 1 iVANDAL plate 9740231 €469.12 Useful in replacements, when the entrance panel to be replaced is larger than the entrance panel to be installed or in installations where the wall has irregularities. Construction in AISI 316L stainless steel with a thickness of 2.5 mm. Protection against knocks and impacts up to IK09 grade. Add to cart
Accessories Custom USOA plate screw covers 9710030 €447.58 Cover custom lower screws for USOA street sign. 10 units Add to cart
Accessories ALOI recessed box 12 heights CMO-612 9740249 €147.20 Recessed box for fixing the street panel. This box is made of metal. For ALOI series boards. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box 4 heights CMO-604 9740245 €82.46 Recessed box for fixing the street panel. This box is made of metal. For ALOI series boards. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box 10 heights CMO-610 9740248 €128.20 Recessed box for fixing the street panel. This box is made of metal. For ALOI series boards. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box 8 heights CMO-608 9740247 €100.55 Recessed box for fixing the street panel. This box is made of metal. For ALOI series boards. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box 6 heights CMO-606 9740246 €86.64 Recessed box for fixing the street panel. This box is made of metal. For ALOI series plates. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box 2 heights CMO-602 9740244 €73.27 Recessed box for fixing the street panel. This box is made of metal. For ALOI series plates. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories ALOI recessed box for CMO-601 module 9740243 €52.03 Recessed box for fixing the street panel. This box is made of metal. For ALOI series boards. It has supports that allow the entrance panel to be held and folded during installation, thus facilitating the work of connecting and commissioning the different elements of the system. Add to cart
Accessories Module 2 simple buttons USOA MPP-012 9710019 €87.54 Complete module for USOA entrance panel. This module incorporates 2 tactile call buttons arranged in a column (right). 1 window. Includes the EPP-012 electronic module and the CPP-012 front Add to cart
Accessories Module 4 simple buttons USOA MPG-014 9710022 €168.19 Complete module for USOA entrance panel. This module incorporates 4 tactile call buttons arranged in a column (right). 2 windows. Includes two electronic modules EPP-012 and the front CPG-014 Add to cart
Accessories Set of 10 iACCESS LAC-200 proximity cards 9690040 €54.15 Electronic proximity cards for residents, iACCESS system. Set of 10 cards.Compatible with iACCESS readers based on the ELP-000, CCA-002 and CCA-004 panels, and with the ERLEA PLUS kit Add to cart
Accessories USOA MCP-000 Blind Module 9710026 €37.39 Complete module for USOA entrance panel. Blind. 1 window. Includes the ECP-000 rear module and the CCP-000 front module9770096 ECP-000 DescriptionBlind rear module for plate USOA Street. Category: Spare parts.9770111 CCP-000 DescriptionFront glass for USOA street panel. Category: Spare parts. Front part belonging to the complete MCP-000 module Add to cart
Accessories Module 4 double buttons USOA MPG-024 9710024 €168.19 Complete module for USOA entrance panel. This module incorporates 8 tactile call buttons arranged in 2 columns (Left and right), 2 windows. Includes two EPP-022 electronic modules and the CPG-024 frontElectronic module for USOA entrance panel. Category: Spare parts. This module incorporates 4 tactile call buttons arranged in 2 columns (Left and right). Add to cart
Accessories USOA HST-002 front extraction tool 9730106 €13.92 Security tool for removing the fronts of the USOA entrance panel. This tool is essential for the safe removal of the fronts. Do not use other tools, such as screwdrivers or punches, there is a high risk of causing irreversible damage to the USOA fronts, which are made of tempered glass. Add to cart