List of products by brand JIMTEN

JIMTEN is a Spanish manufacturer specialised in the development and manufacture of plastic solutions for fluid conveyance and drainage. Since 1965, it has developed products for plumbing, building, sanitation, industry and irrigation, with extensive experience in systems intended for installation professionals.

At Electrochannel, you will find a selection of JIMTEN products mainly focused on fittings for polyethylene pipes, compression fittings, tapping saddles, connectors, tees, plugs and valves intended for irrigation and water distribution installations.

JIMTEN polyethylene fittings

JIMTEN polyethylene fittings allow pipes used in water installations and irrigation systems to be connected, branched, reduced or closed.

This type of fitting is designed to make PE pipe network assembly easier by means of mechanical connections, avoiding complex installation processes.

The choice of the suitable fitting should be made according to the pipe diameter, connection type, working pressure and network configuration.

JIMTEN fitting for polyethylene pipe

The JIMTEN fitting range allows different configurations to be made within a polyethylene pipe installation.

At Electrochannel, you will mainly find products from the Range 55, designed for fast and secure connections in water and irrigation installations.

These fittings allow pipes to be joined without special tools in many configurations, making both the initial installation and future repairs or extensions easier.

JIMTEN Range 55 straight connector

The JIMTEN straight connector allows two sections of polyethylene pipe of the same diameter to be joined.

It is commonly used to extend a pipeline, repair a section or make a connection between two pipes within an irrigation or water supply installation.

Its fastening system allows a stable and watertight joint to be achieved when correctly installed.

JIMTEN male threaded adaptor

The male threaded adaptor allows a polyethylene pipe to be connected with threaded elements in an installation.

This type of fitting is especially useful for connecting pipes with valves, filters, solenoid valves, manifolds and other hydraulic components.

At Electrochannel, you will find JIMTEN male threaded adaptors from the Range 55 for different pipe configurations.

JIMTEN reducing connectors

Reducing connectors allow polyethylene pipes with different diameters to be connected.

They are useful when an installation needs to go from a larger-section main pipeline to a smaller-diameter secondary pipe.

This type of fitting allows the transition to be made within the network itself without needing to combine multiple parts.

JIMTEN polyethylene tees

JIMTEN tees allow a branch to be created within a polyethylene pipe.

The connection has three outlets that allow the flow to be divided in different directions and is especially common in irrigation networks where a main pipeline feeds different branches.

At Electrochannel, you will find equal tees intended to connect pipes of the same diameter.

End plugs for PE pipe

JIMTEN end plugs allow the end of a polyethylene pipe to be closed.

They are a common solution at the end of irrigation branches or when a pipeline needs to be left ready for a future extension.

The mechanical connection also makes disassembly easier when it is necessary to access the end of the pipe again.

JIMTEN tapping saddles

Tapping saddles allow a branch to be created on an already installed pipe.

The saddle is placed around the pipe and has a threaded outlet from which a new line or component can be connected.

This system is especially useful in irrigation, gardening and water distribution networks, as it allows new outlets to be created without replacing large sections of pipe.

JIMTEN valves for polyethylene pipe

At Electrochannel, you will also find JIMTEN ball valves for PE pipe.

These valves allow the water flow to be opened or closed by means of a quick operation and can be used to divide different areas of an installation into sectors.

They are especially useful in irrigation systems, where they allow branches to be isolated for maintenance or different distribution sectors to be controlled.

JIMTEN fittings for irrigation

The JIMTEN products available at Electrochannel are especially aimed at agricultural irrigation and gardening installations.

Connectors, tees, saddles, plugs and valves allow complete polyethylene networks to be configured to distribute water from the main pipeline to different irrigation sectors.

The use of compatible fittings also makes future modifications of the installation easier when crop or plot needs change.

Connections for PE pipe

Polyethylene pipes are widely used in irrigation due to their flexibility, corrosion resistance and ease of installation.

Compression fittings allow mechanical joints to be made between different sections without needing adhesives.

Before assembly, it is advisable to always check that the nominal diameter of the fitting matches the outside diameter of the pipe.

Agricultural irrigation networks

In an agricultural irrigation installation, it is common to combine pipes of different diameters and create different branches to distribute the flow.

JIMTEN fittings allow these connections to be made in a modular way by means of connectors, reducers, tees and saddles.

Valves help divide the installation into sectors and make maintenance operations easier without needing to empty the entire network.

Garden and green area irrigation

Polyethylene fittings can also be used in garden, lawn and green area irrigation systems.

Tapping saddles allow new branches to be created and threaded adaptors make connection to solenoid valves, filters and other system components easier.

JIMTEN and fluid conveyance

Although Electrochannel’s selection is focused on fittings for polyethylene and irrigation, JIMTEN has a much wider range of products for fluid conveyance and drainage.

The company currently works in sectors such as sanitary, building, renovation, industry and irrigation.

JIMTEN solutions for plumbing

JIMTEN has extensive experience in products for plumbing and sanitation.

Its general catalogue includes traps, drain valves, drainage fittings, couplings, cistern mechanisms and different solutions for bathrooms, kitchens and sanitary networks.

JIMTEN drainage fittings

Within its general catalogue, JIMTEN also manufactures PVC fittings intended for water drainage networks in buildings.

The range includes elbows, branches, plugs and connectors currently manufactured in lead-free PVC ECO.

More than 60 years of experience

JIMTEN’s history began in 1965, when the company started manufacturing traps made from plastic materials as an alternative to the lead systems used at that time.

Since then, it has evolved into a very wide range of plastic solutions for fluid conveyance and currently exceeds 60 years of activity.

JIMTEN Spanish manufacturing

JIMTEN currently highlights its 100% Spanish manufacturing and works with a wide professional distribution network.

The company states that it has more than 2,500 distributors and an extensive range intended for plumbing professionals.

JIMTEN and Aliaxis

JIMTEN is part of the international group Aliaxis, specialised in piping systems and solutions for fluid management.

This integration expands the brand’s international reach while maintaining its industrial and manufacturing activity in Spain.

Which JIMTEN fitting should you choose?

Before selecting a JIMTEN fitting for polyethylene, it is advisable to check several aspects:

• Pipe diameter: it must match the selected fitting.
• Connection type: straight, reduced, branch or threaded.
• Network configuration: joining, branching, closing or sectoring.
• Working pressure: it must be suitable for the installation.
• Connected element: pipe, filter, valve, solenoid valve or other component.

Buy JIMTEN fittings at Electrochannel

Browse our selection of JIMTEN products for irrigation and water conveyance installations using polyethylene pipe.

At Electrochannel, you will find JIMTEN Range 55 fittings, polyethylene connectors, tees, tapping saddles, end plugs and valves for PE pipe intended for agricultural irrigation, gardening and water distribution.