List of products by brand FUNDICION LOPEZ INIESTA

Fundición López Iniesta is a Spanish manufacturer specialised since 1960 in ductile and grey cast iron for sanitation, water supply, public works, urban development and service networks. Its catalogue includes manhole covers, frames, grates, drains, channels and different elements designed to cover, protect and facilitate access to inspection chambers and buried installations.

At Electrochannel, you can find a selection of Fundición López Iniesta products mainly focused on access covers and frames, hydraulic covers, grates and cast iron solutions for pedestrian areas, car parks, roads and other installations subject to different load levels.

Fundición López Iniesta manhole covers

López Iniesta manhole covers are designed to cover inspection chambers, wells and inspection pits, allowing access to sanitation, electricity, telecommunications, water supply and other service installations to be maintained.

The range includes different sizes, formats and resistance classes to adapt to the installation location and the type of traffic expected.

To choose the right cover, it is essential to check both the external size, clear opening, frame height and load class.

B125 hydraulic covers

B125 hydraulic covers are mainly intended for pedestrian areas, pavements, patios, communities and spaces with occasional circulation of light vehicles.

Fundición López Iniesta manufactures B125 covers and frames in numerous dimensions, allowing small and large chambers to be covered according to the needs of the installation.

At Electrochannel, you can find different sizes of B125 ductile cast iron covers for new builds, renovations and replacement of existing covers.

C250 covers and access covers

C250 covers are suitable for areas subject to higher loads than those usual in exclusively pedestrian areas.

They are used in certain car parks, areas near kerbs, circulation areas and other installations where vehicles and vans may pass.

The choice between B125 and C250 should always be made according to the actual location and the expected traffic conditions.

D400 covers for roads

D400 manhole covers are intended for areas with wheeled traffic from heavy vehicles, such as roads, streets, industrial areas and truck circulation areas.

Their design and resistance are prepared to withstand significantly higher loads than B125 and C250 classes.

For this type of installation, it is especially important to correctly select the frame, dimensions and locking system.

Ductile cast iron for covers and access covers

Ductile cast iron is one of the most commonly used materials in covers and grates for public works due to its high mechanical resistance and ability to withstand repeated loads.

Compared with other materials, it offers a combination of strength, durability and stability suitable for installations subject to traffic and demanding outdoor conditions.

Fundición López Iniesta manufactures its main covering elements in accordance with the regulations applicable to ductile cast iron covers and frames.

UNE EN 124 standard

Covers, access covers and grates intended for circulation areas are classified according to UNE EN 124, which establishes different resistance classes depending on the installation location.

Among the most common classes are:

• B125: pedestrian areas, pavements and areas with light vehicles.
• C250: certain parking areas, kerbs and areas subject to higher loads.
• D400: roads and areas with wheeled traffic.
• E600 and F900: especially demanding applications such as ports, airports or heavy industrial installations.

Selecting a class lower than required can compromise the safety and durability of the cover.

Square and rectangular access covers

Fundición López Iniesta offers square and rectangular access covers in different sizes to adapt to masonry chambers, drainage channels and service chambers.

These solutions provide wide and stable access to buried installations, making maintenance and inspection operations easier.

Recessed covers

Recessed covers are designed to integrate the surface finish within the cover itself.

They allow paving, tiles or other materials similar to the surroundings to be used, making the cover more visually integrated into pavements, squares, patios and paved areas.

They are an especially interesting solution when combining access to the chamber with a more discreet finish.

Cast iron grates for water collection

Fundición López Iniesta grates make it possible to collect and drain surface water in patios, streets, car parks and other outdoor areas.

The range includes grates with and without frames, as well as models for channels and drainage systems.

Their selection will depend on the passage width, drainage capacity and expected traffic class.

Drainage grates

Drainage grates allow water from rain, cleaning or runoff to be quickly collected and directed towards the drainage network.

Fundición López Iniesta offers different formats and dimensions, including models prepared for pedestrian traffic and others intended for vehicle loads.

Cast iron drains

López Iniesta drains are designed to collect water in patios, terraces, urban areas and other installations.

Different configurations and sizes are available to adapt to the outlet diameter and the drainage needs of each installation.

Channels and drainage

The manufacturer’s catalogue also includes channels and grates for linear drainage, used to collect water along accesses, car parks, industrial areas and developed spaces.

These solutions make it possible to create continuous drainage lines and can be combined with grates of different load classes.

Covers for electrical and telecommunications networks

Fundición López Iniesta manufactures specific access covers for electrical networks, telephony, lighting and other urban infrastructures.

These models may incorporate markings or identifications that make it easy to recognise the service housed under the cover.

Custom and marked covers

The manufacturer offers the possibility of producing custom covers for town councils, organisations and specific projects.

Models can be manufactured with coats of arms, texts, service names and other identifications according to project needs.

Locking systems for covers

Certain models may incorporate screw locking systems that help make unauthorised openings and theft more difficult.

There are also configurations with seals and screws designed to improve the watertightness of the assembly.

Which manhole cover should you choose?

To correctly select a cast iron cover or access cover, several factors must be checked:

• External frame size.
• Clear opening.
• Required load class.
• Installation area.
• Expected traffic type.
• Square, rectangular or circular format.
• Need for locking or watertightness.

The load class must always be chosen according to the actual installation point and not only based on the weight of a specific vehicle.

Spanish manufacturing since 1960

Fundición López Iniesta has been manufacturing in Spain since 1960 and has its own facilities dedicated to the production of ductile and grey cast iron.

The company works for sectors such as sanitation, water supply, public works and urban development, and manufactures different covering, drainage and urban furniture elements.

Buy Fundición López Iniesta at Electrochannel

Browse our selection of Fundición López Iniesta products and find covers, access covers and grates adapted to different types of works and installations.

At Electrochannel, you will find B125, C250 and D400 manhole covers, hydraulic covers, cast iron grates, drains and solutions for inspection chambers in different sizes and configurations.