Lifting clamp for vertical sheet cs

The vertical sheet metal clamp has a mechanism that allows you to safely lift parts with a hardness of 37 RC.

Characteristics of the lifting clamp

It has a safety factor of 5 that guarantees the operation of the clamp during lifting in a vertical direction.
The clamp has a test load indicated for the standard lifting of steel sheets. 
Capacity up to 750 KG

Lifting clamp for the safe transport of steel sheets in a vertical position.

Properties:

• Equipped with standard lifting eye, movable in one direction.
• Always equipped with a safety mechanism, ensuring that the clamp does not slip when lifting force is applied and when the load is lowered.
• The WLL and jaw opening size are clearly indicated on the clamp.
• Safety factor of at least 5 x WLL.
• Each clamp has a test load of 2x WLL.

Request:

• To lift steel sheets up to a hardness of 37 RC (345 HB).
• Suitable for lifting, 180° turning and vertical transportation of steel sheets.

Marking: according to standard, CE marking

Standard: EN 12100, EN 13155

Note: The minimum weight to be lifted is 10% of the safe working load.

Safety factor: 5

Available in other lifting and operating heights upon request.