Chain octopus, 1 strand of 8 mm, with direct latch hook to chain

Characteristics chain octopus 1 branch 8 mm with direct latch hook to chain

Large loads. It allows you loads of 2000 kg.

Durability. Its robust construction guarantees great prolonged use.

They withstand wear and tear. Its coating gives the tool strength against wear, thus giving you high safety.

NOMINAL DIMENSION			SLINGS 1 BRANCH	2 BRANCH SLINGS		SLINGS 3 AND 4 BRANCHES
				β<45°	45°<β<60°	β<45°	45°<β<60°
Angle between opposite branches not applicable to 3 branches, α				α<90°	90º<α<120°	α<90°	90o<α<120°
Nominal dimension			MAXIMUM USE LOAD - CMU [kg]EN 818-4, safety coefficient 4:1
mm	Grade	inch	Balanced loaded steel cable slings*
6	80	7/32"	1,120	1,600	1,120	2,360	1,700
7	80	9/32"	1,500	2,120	1,500	3,150	2,240
8	80	5/16"	2,000	2,800	2,000	4,250	3,000
8	100	5/16"	2,500	3,500	2,500	5,250	3,800
10	80	3/8"	3,150	4,250	3,150	6,700	4,750
10	100	3/8"	4,000	5,600	4,000	8,400	6,000
13	80	1/2"	5,300	7,500	5,300	11,200	8,000
13	100	1/2"	6,700	9,400	6,700	14,000	10,000
16	80	5/8"	8,000	11,200	8,000	17,000	11,800
16	100	5/8"	10,000	14,000	10,000	21,000	15,000
19	80	3/4	11,200	16,000	11,200	23,600	17,000
22	80	7/8	15,000	21,200	15,000	31,500	22,400
26	80	1	21,200	30,000	21,200	45,000	31,500
32	80	1 1/4	31,500	45,000	31,500	67,000	47,500

*For slings loaded unbalanced, the following CMU should be taken: · 2-leg slings, calculate the CMU as if it were
of 1-leg slings. · Slings with 3 and 4 legs, calculate the CMU as if it were slings with 2 legs.

USE

1. Do not lift with a twisted chain. 2. Shorten chains only with shortening hooks. Knots should be avoided. 3. When handling loads with edges, sharp points or cutting edges, the chains must be protected with appropriate padding or padding. 4. Hooks should not grab loads with their ends, but with the inside. 5. Hooks not used during lifting must be attached to the main ring. 6. Make sure that the ring can move freely on the crane hook. 7. Replace damaged accessories as soon as they are detected. 8. Do not overload the chains, check that the angle inclination is respected and, if in doubt, always choose a larger chain.

Includes approval plate indicating the workloads. Available CE quality certificate