Oroflex Bandama Robust Extruded Rubber Flat Hose (m.)

Applications:

Designed and recommended for mobile irrigators, side swivels, heavy duty dredge discharge, pumping sludge, sludge and liquid manure and any application where high abrasion resistance is required. p>

Construction:

Made of 100% high tenacity circularly woven synthetic yarn, fully protected and enclosed by a tough, highly resistant PVC and synthetic nitrile rubber blend, extruded through the fabric and forming a single homogeneous construction without the use of glues or adhesives.

Coating properties:

A. Maximum tensile strength of the liner and cover: Guaranteed minimum value of 1500 psi (10,500 kPa).
B. Maximum elongation: 400% minimum.
C. Accelerated aging test: The tensile strength and ultimate elongation of the vulcanized rubber compound have been tested with oxygen at a pressure of 300 psi +/- 10 psi (2100 kPa +/- 70 kPa ) and a temperature of 70 degrees Celsius +/-1 degree (158 ºF +/- 18 ºF) for a period of 96 hours, after which the rubber properties are at least 60% of the original values. span>

Abrasion resistance:

The OROFLEX BANDAMA hose will extend the life of your application in extreme conditions, where abrasion is the main concern. Abrasion resistance> 2000 cycles.

Service temperature range:

-4ºF (-20ºC) to 176ºF (80ºC)

Ozone resistance:

No visible signs of cracking appear in the coating or cover when tested in accordance with Procedure B of ASTM D518, 100pphm / 104ºF (40ºC).

Chemical resistance:

Exposure to seawater and contamination by most chemicals, hydrocarbons, oils and greases does not affect the short or long term performance of the hose. A chemical resistance table is available and TIPSA will provide specific chemical resistance data upon request by the purchaser for unique applications.

Lengths:

Standard 330 feet (100 m) and 660 feet (200 m). Special lengths may be available upon request.

Couplings:

As requested by the buyer; Camlock, Bauer, Perrot, Victaulic, Storz, etc.